WIRE TIPS: DROPLETTES
Wrapping the briolettes.

Using flat nose pliers, grasp the 22-gauge wire 1/2" from the end and bend it to a 45° angle. Thread the briolette onto the wire then bend it into a triangle, over the top of the briolette.

Using chain nose pliers, grasp the base of the longer wire and bend it back down a bit. Using your round nose pliers, grasp the wire next to the bend and create a loop as before.

Finish by wrapping the wire end around the base 3 times. Trim the excess wire with flush cutters and gently file any rough edges smooth. Repeat Steps 9 and 10 for your other briolette drop.